手电筒用英语怎么说吗

虽然现在手电筒的使用已经没那么广泛了，但是作为以前它可是大大方便了我们的生活呢，今天本站小编在这里为大家介绍手电筒用英语怎么说，欢迎大家阅读！

flashlight

electric torch

手电筒电池 flashlight battery

微型手电筒 mini flashlight

强光手电筒 Glare flashlight

1. She froze when the beam of the flashlight struck her.

当手电筒的光照到她身上时她僵住了。

2. Stopping to rest, Pete shut off the flash.

皮特关掉手电筒，停下来休息。

3. Shine the torch on the lock while I try to get the key in.

我插钥匙时，请用手电筒照着锁头。

4. The burglar shone his torch into the dark room.

盗贼将手电筒照进黑暗的房间.

5. Shine the torch on so that we can read the labels.

用手电筒照这个标签,我们好看得见.

6. I saw the sudden flare of a flashlight in the darkness.

我看到手电筒在黑暗中突然闪出的亮光.

7. Flash your light about and see if anyone is hiding here.

用手电筒四周照照,看看是否有人藏在这里.

8. He flashed a torch to guide me.

他用手电筒为我引路.

9. Shine the torch up into the rafters, please.

请用手电筒照房椽.

10. Most flashlights work on two batteries.

大多数的手电筒用两节电池.

11. Suddenly somebody flashed an electric torch.

手电筒霍然一亮.

12. A flashlight beam probed the underbrush only yards away from their hiding place.

一束手电筒的光束在离他们的藏身之地只有几码远的灌木丛里搜寻着。

13. The torchlight swung across the little beach and out over the water, searching.

手电筒的光在小海滩上扫过，而后照向水面搜索着。

14. I could see the beam of his flashlight waving around in the dark.

我可以看到他的手电筒光在黑暗中上下舞动.

15. His flashlight was still clipped to his belt.

他的手电筒还别在皮带上。

How to turn a Minimag flashlight into a burning laser! CAUTION! As you know lasers can be dangerous. Never point them at any living object!

注意了，如何使一个小小的手电筒变成一个激光灯?你知道激光灯是一个危险的道具，千万不要用它指着任何活物。

Step 1: Take Apart Your DVD Burner

第一步，拆开DVD刻录机

First you'll need a 16X DVD burner.I'm using a LG that I had as a spare. Remove all the screws and take apart the case.

首先需要一个16X的刻录机。我自己使用的是一个LG牌子的刻录机，还有一个备用的。去掉所有的东西，只要这个小盒子。

Remove the drawer to expose the carriage assembly. That's where you will find the powerfull laser diod.

去掉外壳之后你会发现激光直拨外线。

Step 2: Remove The Laser Diod

第二步，取下激光外线

All DVD burners will have a set of rails that the laser assembly rides on.

所有的刻录机都有一组插孔，激光装置就插在上面。

After pulling out the assembly, start removing all the little screws to get to the laser diod. Be careful because the diod is a fragile electronic component.

拔出这个装置，取下所有的零部件以找到激光外线。要小心，因为这个外线是易碎的电子元件。

Step 3: Disassemble An AixiZ Laser Housing

第三步，拆开激光装置

Then you'll need to pick up an AixiZ laser will have to disassemble it and also remove the laser that comes in the housing.

拿起激光装置在的部件，拆分，并使激光发光部件分离。

I used the back end of an exacto knife handle and gently tapped out the existing laser diod.

我用刀子的刀背挑出DVD中的激光外线。

Step 4: Install The Laser Into The New Housing

第四，将取出的外线装置移植到新地方

Then you're going to carefully install the DVD laser into the new laser housing. You're almost done.

小心将DVD激光放置到新的基架上，就基本完成了。

Step 5: Connect Up Your Laser Diod

第五步，连接激光外线

All DVD laser diods use a similar configuration. Be sure to test your polarity using two AA batteries.

所有的DVD激光外线都有类似的配置，用两节AA电池测试输出电压。

Then you're going to solder two longer pins onto the positive and negative terminals onto laser diod.

然后将长插脚两端焊接在外线的两极上。

Step 6: Add The Laser To The Mag Lite

把激光与手电筒相连。

Disassemble your Mag Lite, removing the ring, the inside reflector and of course, the bulb.

拆开手电筒，移除弹簧、内置镜和灯泡。

We'll need to drill out the existing reflector so it sits around the laser housing.

需要穿过反射器，这样激光能处在反射器中间。

Step 7: Test It For Yourself

第七，亲自试验一番

Now put everything back your two AA batteries,And here are the test results.

现在将所有的东西组组装起来，装上两节AA电池，然后你就能看到结果了。

Your new burning laser pointer easily lights a match and pops a balloon in an instant. That's how you turn a mini-mag flashlight to a powerful burning laser pointer.

这个激光束轻易就点燃了火柴，烧投了气球。这就是改造手电筒成激光的神奇过程。

猜你喜欢：

1.3篇英语短文带翻译阅读

2.英语哲理故事带翻译阅读

3.英语短文带翻译150字

4.有关英语短文带翻译阅读

5.英语短文带翻译